DM01 Standard POF shrink film
Our POF shrink film has been certified by SGS to meet food contact regulations. No harmful gases are emitted during use. It is an economical product that is easy to use on most packaging machines. This film can print 8 colors.
Product Performance:
¢ÙEnvironmental protection with high quality.
¢ÚHigh seal strength.
¢ÛHigh shrinkage ratio.
¢ÜSealed packaging to prevent from ash and warm.
¢ÝLightness,toughness, flexibility and even thickness.
¢ÞEndurable cold at low temperature.
¢ßFine heat sealing performance
Main Parameter Data |
Product |
DM01 STANDARD POF SHRINK FILM |
Property |
Unit |
Test Method |
Representative Value |
Physical Property |
Thickness |
Micron |
|
10 / 12.5 |
15 |
19 |
25 |
Density |
g/cm3 |
|
0.922 |
0.922 |
0.922 |
0.922 |
Tensile Property (MD/TD) |
Elastic Mouduls |
N/mm2 |
ASTM-D882A |
330/450 |
340/450 |
350/450 |
360/450 |
Tensile Strength |
MPa |
ASTM-882 |
110/110 |
110/110 |
110/110 |
105/105 |
Elongation at Break |
% |
ASTM-882 |
105/110 |
105/110 |
110/110 |
110/115 |
Seal Strength |
g/cm3 |
Internal Method |
610 |
870 |
1025 |
1250 |
N/mm2 |
40 |
57 |
53 |
49 |
Tear Propagation |
g/cm3 |
ASTM-D1938 |
6.0 |
5.5 |
9.5 |
14.5 |
COF film to film |
Adim |
ASTM-D1894 |
0.20 |
0.20 |
0.20 |
0.20 |
Free Shrink at 130¡æ |
% |
ASTM-D2732 |
70/70 |
70/70 |
70/70 |
70/70 |
Optical Property |
Haze |
% |
ASTM-D1003 |
1.1 |
1.3 |
1.8 |
2.3 |
Gloss |
photoc |
ASTM-D2457 |
135 |
135 |
135 |
130 |
Dimension Specification |
Width |
mm |
200--1600 |
Length /roll |
S/S(single layer) |
3200m |
2665m |
2135m |
1600m |
C/F(center fold) |
1600m |
1332m |
1067m |
800m |
|
Values listed are average test values to be used for information purposes, subject to possible variations.
Products are to be stored in dry conditions below 35 deg. Cent. |